APC Symmetra PX 500 kVA

A high-performance, 3-phase, modular, scalable, power protection solution with industry-leading efficiency, capacity, and performance for medium to large data centers and mission critical environments.

Category:
Brand: APC

Specifications

Overview
Presentation A high-performance, 3-phase, modular, scalable, power protection solution with industry-leading efficiency, capacity, and performance for medium to large data centers and mission-critical environments.
Lead time Usually Ships within 6 Weeks
Main
Run time for load 500,000W
Min-max: 50,000-500,000 W
5min 57s
Max. Capacity Used
100 %
Main Input Voltage 480 V 3 phase
400 V 3 phase
Other Input Voltage 415 V
Main Output Voltage 480 V 3 phase
400 V 3 phase
Other Output Voltage 380 V
415 V
Kw Rating 500000 W
rated power in VA 500000 VA
Output connector type Hard Wire 4-wire (3PH + G) 1
Hard Wire 5-wire (3PH + N + G) 1
Battery Type VRLA
Provided equipment Assembly service
Installation guide
Network Management Card
Start-Up Service
User Manual
Batteries & Runtime
Run Time

Efficiency

Included Battery Modules 32
Battery Slots Empty 0
Typical recharge time 3.5 h
RBC Quantity 6
Overload Operation 10 minutes @ 125% and 60 seconds @ 150%
Battery Charge Power (Watts) 47262 W rated
Battery design life 5…8 year(s)
Extendable Run Time 1
General
Bypass Voltage Tolerance +/-10% settable from +/-4/6/8 and 10%
Number of power module free slots 0
Number of power module filled slots 20
Redundant Yes
Physical
color Black
Height 78.39 in (199.1 cm)
Width 204.72 in (520 cm)
Depth 42.13 in (107 cm)
Net Weight 18785.6 lb(US) (8521 kg)
USB compatible No
Input
Input Frequency 40 – 70 Hz auto-sensing
Number of input connectors 1 Hard Wire 4-wire (3PH + G)
1 Hard Wire 5-wire (3PH + N + G)
Efficiency at full load 340…460 V 400 V
408…552 V 480 V
Maximum Short Circuit Withstand (Icw) 50 kA
Input Total Harmonic Distortion Less than 5% for full load
Input protection type 3-pole breaker
Load power factor 0.5 leading to 0.5 lagging
Input Power Factor at Full Load 0.99
Output
Max Configurable Power (Watts) 500000 W
Harmonic distortion Less than 2%
Output frequency 50 Hz sync to mains
60 Hz +/- 0.1 % for 60 Hz nominal not synced
50 Hz +/- 0.1 % for 50 Hz nominal not synced
60 Hz sync to mains
Topology Double Conversion Online
Waveform Type Sine wave
Output voltage tolerance +/-1% static and +/- 5% at 100% load step
Output Voltage THD < 2% linear load and < 3% non-linear load
Overload Operation 10 minutes @ 125% and 60 seconds @ 150%
Bypass type Built-in Maintenance Bypass
Built-in Static Bypass
Efficiency at full load 96 % in battery operation)
Maximum configurable power in VA 500000 VA
Transfer Time 2ms typical
Conformance
Product Certifications cUL Listed
Eurobat General Purpose
UL Listed
Standards CSA C22.2 No.107.3-05
EN/IEC 62040-1-1
EN/IEC 62040-2
EN/IEC 62040-3
UL 1778
UL 60950-1
Environmental
Ambient air temperature for operation 32…104 °F (0…40 °C)
Relative Humidity 0…95 %
Operating altitude 0…3333 ft
Ambient Air Temperature for Storage 5…104 °F (-15…40 °C)
Storage Relative Humidity 0…95 %
Storage altitude 0…50000 ft (0…15240 m)
Acoustic level 54 dBA
Heat dissipation 61893 Btu/h
NEMA degree of protection NEMA 1
IP degree of protection IP20
Communications & Management
Free slots 1
Pre-Installed SmartSlot™ Cards Network management card 2 with environmental monitoring, out of band access and Modbus
Control panel Touch Screen LCD User Interface
Emergency Power Off (EPO) Optional
Packing Units
Unit Type of Package 1 PCE
Nbr. of units in pkg. 1
Package 1 Height 84.65 in (215 cm)
Package 1 Width 50.00 in (127 cm)
Package 1 Length 279.53 in (710 cm)
Package weight(Lbs) 20533.9 lb(US) (9314 kg)